|
|
|
|
|
|
HomeHome & GardenHome ImprovementPower & Hand ToolsPower Tool Accessories |
|
|
|  |
| Customer Reviews: | | Average Customer Review:
Write an online review and share your thoughts with other customers.
 Another Awesome Dewalt product Mar 12, 2010
I bought this saw after buying a combo kit of Dewalt tools and being impressed with the quality of their tools. I build haunted houses several months out of the year and good quality tools are a must. Having a quality circular saw is a must and to have one that is cordless makes portability and safety a benefit. Typically, making props can be a challenge and often times on-the-spot cuts need to be made to open a wall or to trim a door to make it fit in an awkward position. With this saw, the time it took to make these cuts was incredibly shortened. I was able to rip large pieces of plywood, 2x4's and even 4x4's with this with no hassle. It's also much quieter than many other saws. Not having to worry about where the power cord is or having to set up power to make a cut is a huge relief as well. This saw can cut a lot of wood with the XRP 18v battery. I would often times use one battery for all the tools I was using and got several hours of continual and hard use out of one charge. Since I have more than one battery, it was easy to just switch them out and the one hour charger means you have another battery ready to go when you need it. This is a great product. Highly recommended.
1 of 1 found the following review helpful:
Git 'er Done! Jul 17, 2009
When i burned out my corded circular saw I'd had for 17 years, I figured it was time to break down and get something a little more portable. I was surprised at how light, but solid feeling the saw was. Not unlike other DEWALT power tools I own, this critter does not lack power. The first job I used it on was was cutting stringers for a deck. Three in all, 9 feet each. Handily did this job in a single charge and I used the blade that came in the kit.
Any time you break in a new circular saw, you have to figure out which portion of the front blade guard to line up with your cutting line. Mine lined up perfectly, right where you'd expect it to, making it simple to make straight, accurate cuts. I even had to rip a 4 foot board for a header as I was building the deck stairs and I used the rip guide that came with it. After a few minutes of trying to tighten the little nut that secures the guide to the saw, I was off and running. Even with a little pinching at the end of the cut, the DEWALT did fine.
I don't exclusively buy DEWALT, but these are pretty tough job site tools. I left my drill out one night and as luck would have it, we got rain. Dried it out and two years later, still runs like a charm.
Can't wait to build another project with it.... shhhhhhh don't tell my wife i've already bought the lumber for it.
1 of 1 found the following review helpful:
cordless 18 volt saw Jun 22, 2008
Good quality & Value...Adequate power and run time. Comes with arbor tool.
quick and easy depth and angle adjustments.
2 of 2 found the following review helpful:
 Disappointed Feb 28, 2008
Knowing what I know now I would not buy this saw again.
My sawdust manufacturing facility is in the cellar and I never build anything that requires a full sheet of plywood. To save on the hassle of power cords I bought this saw to rip plywood as needed into a manageable transporting size. I find this saw to be way underpowered, the blade speed seems extremely slow. I find it very difficult to cut a strait line even when using a guide.
Update 12/12/09
Still feel that it's under power and therefore of limited use; but have put it to use multiple times when I needed to just cut a few 2x4's down to size and did it's job so I've upgraded it to 3 stars. You can't be in a hurry with this saw, you need to let cut at it's pace.
1 of 1 found the following review helpful:
 Will pinch your triger finger Feb 08, 2008
I got this saw as part of the 6pak combo. First thing I noticed is that your finger immediately gets trapped and pinched between the trigger and the handle. Yes it has plenty of power and torque, I was impressed by that when I made my first cut. But all cordless saws, even Ryobi are good enough for what most people need. But everytime I pick this thing up, I am reminded to pull on the triger in an un-natural way so that I dont scrape my index finger against the sharp seem of the plastic handle. This needs to be redesigned for the nano version. I am so annoyed by this seemingly slight problem, I'm now open to owning other brands, I was a dewalt loyalist for years.
This tool also lacks any rubber over-molding on the grip or front handle. It just looks dated compared to the other tools in the combo. I know tools are about power and performance, but with dewalt, thats a given, so these other kind of details are becoming important to a guy who has cordless tools in his hands all day. Just look at the odd angle of the guy holding the saw in the pictures above, he looks awkward and scared. The handle dynamics of this tool need to be re-addressed to be in a more natural wrist position.
The rip fence is something that I never used before. I just now discovered how convenient this little thing can be. However, the set screw is buried between the motor and the front of the base plate hinge. Your cant get your big knuckles down in there to get a good turn on it. The knob needs to be a little further back towards the motor and be taller, that would make it easier to grasp.
The markings on the rip fence start at the fence and are at inch intervals along the the rest of the bar as it slides into the base plate......these markings should be arranged in such a way to indicate the distance from the blade its-self, to the fence. So ideally you can just set it at 4 inches and know that the piece your about to cut is going to be 4 inches wide. As it is now, the inch markings on the fence just serve as a ruler that has no relation to the width of your cut. Oh and the rip fence generally dosen't really work that well, even if they fixed the flaws that I've mentioned.
Overall, I'm going to start trying other people tools to see if I should go in a non yellow direction in the future.
|
| | |
|
|
|
|
|
